for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 168 hmc329lc3b gaas mmic fundamental mixer, 24 - 32 ghz v03.1208 general description features functional diagram passive: no dc bias required input ip3: +18 dbm lo/rf isolation: 38 db wide if bandwidth: dc - 8 ghz robust 500v esd, class 1b 12 lead ceramic 3x3 mm smt package: 9mm 2 electrical speci cations, t a = +25 c, if= 1 ghz, lo= +13 dbm* typical applications the hmc329lc3b is ideal for: ? point-to-point radios ? point-to-mulit-point radios & vsat ? test equipment & sensors ? military end-use the hmc329lc3b is a general purpose double balanced mixer in a leadless rohs compliant smt package that can be used as an upconverter or downconverter between 24 and 32 ghz. this mixer requires no external components or matching circuitry. the hmc329lc3b provides excellent lo to rf and lo to if suppression due to optimized balun structures. the mixer operates with lo drive levels above +9 dbm. the hmc329lc3b eliminates the need for wire bonding, allowing use of surface mount manufacturing techniques. parameter min. typ. max. units frequency range, rf & lo 24 - 32 ghz frequency range, if dc - 8 ghz conversion loss 10.5 12.5 db noise figure (ssb) 10.5 12.5 db lo to rf isolation 32 38 db lo to if isolation 26 40 db rf to if isolation 20 30 db ip3 (input) 18 dbm ip2 (input) 40 dbm 1 db gain compression (input) 13 dbm *unless otherwise noted, all measurements performed as downconverter, if= 1 ghz.
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 169 conversion gain vs. temperature conversion gain vs. lo drive isolation if bandwidth return loss upconverter performance conversion gain vs. lo drive -20 -15 -10 -5 0 23 25 27 29 31 33 +25 c +85 c -40 c conversion gain (db) frequency (ghz) -20 -15 -10 -5 0 23 25 27 29 31 33 lo rf return loss (db) frequency (ghz) -20 -15 -10 -5 0 23 25 27 29 31 33 +9 dbm +11 dbm +13 dbm +15 dbm conversion gain (db) frequency (ghz) -20 -15 -10 -5 0 23 25 27 29 31 33 +9 dbm +11 dbm +13 dbm +15 dbm conversion gain (db) frequency (ghz) -20 -15 -10 -5 0 0123456789101112 conversion gain return loss response (db) frequency (ghz) -60 -50 -40 -30 -20 -10 0 23 25 27 29 31 33 lo/rf lo/if rf/if isolation (db) frequency (ghz) hmc329lc3b v03.1208 gaas mmic fundamental mixer, 24 - 32 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 170 mxn spurious outputs input ip2 vs. temperature * input ip3 vs. lo drive * input ip3 vs. temperature* input ip2 vs. lo drive * * two-tone input power = -10 dbm each tone, 1 mhz spacing. input p1db vs. temperature nlo mrf01234 0xx9xxxxxx 1 20 0 42 xx xx 2xx725880xx 3xxxx987090 4 xxxxxx100104 rf = 28 ghz @ -10 dbm lo = 27 ghz @ +13 dbm all values in dbc below the if output power level. 0 10 20 30 40 50 60 23 25 27 29 31 33 +25 c +85 c -40 c ip2 (dbm) frequency (ghz) 0 10 20 30 40 50 60 23 25 27 29 31 33 +9 dbm +11 dbm +13 dbm +15 dbm ip2 (dbm) frequency (ghz) 4 6 8 10 12 14 16 23 25 27 29 31 33 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 0 5 10 15 20 25 23 25 27 29 31 33 +25 c +85 c -40 c ip3 (dbm) frequency (ghz) 0 5 10 15 20 25 23 25 27 29 31 33 +9 dbm +11 dbm +13 dbm +15 dbm ip3 (dbm) frequency (ghz) hmc329lc3b v03.1208 gaas mmic fundamental mixer, 24 - 32 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 171 absolute maximum ratings rf / if input +13 dbm lo drive +27 dbm channel temperature 150 c continuous pdiss (ta = 85 c) (derate 5.88 mw/c above 85 c) 382 mw thermal resistance (junction to ground paddle) 170 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1b electrostatic sensitive device observe handling precautions outline drawing notes: 1. package body material: alumina. 2. lead and ground paddle plating: gold flash over nickel. 3. dimensions are in inches (millimeters). 4. lead spacing tolerance is non-cumulative. 5. characters to be helvetica medium, .025 high, black ink, or laser mark located approx. as shown. 6. package warp shall not exceed 0.05mm datum ? c ? 7. all ground leads and ground paddle must be soldered to pcb rf ground. 8. classified as moisture sensitivity level (msl) 1. hmc329lc3b v03.1208 gaas mmic fundamental mixer, 24 - 32 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 172 pin number function description interface schematic 1, 3, 4, 6, 7, 9 gnd package bottom must also be connected to rf/dc ground. 2lo this pin is dc coupled and matched to 50 ohms. 5if this pin is dc coupled. for applications not requiring opera- tion to dc, this port should be dc blocked externally using a series capacitor whose value has been chosen to pass the necessary if frequency range. for operation to dc, this pin must not source or sink more than 2 ma of current or part non-function and possible part failure will result. 8rf this pin is dc coupled and matched to 50 ohms. 10, 11, 12 n/c no connection required. these pins may be connected to rf/dc ground without affecting performance. pin descriptions hmc329lc3b v03.1208 gaas mmic fundamental mixer, 24 - 32 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 173 evaluation pcb item description j1 - j2 sri sma connector j3 johnson sma connector u1 hmc329lc3b mixer pcb [2] 117611 evaluatio n pcb [1] reference this number when ordering compete evaluation pcb [2] circuit board material: arlon 25fr the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appro- priate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 109952 [1] hmc329lc3b v03.1208 gaas mmic fundamental mixer, 24 - 32 ghz
|
